|Shape:||Wire Spool , Square Shaped||Liquidus Temperature:||800℃|
|Application:||Copper Alloy Parts||Solidus Temperature:||1310Â°F (710Â°C)|
|Hot Sale Size:||450 - 550mm||Avvantage:||Good Operation|
|Product Name:||Phos Copper Brazing Filler Metal||Cu:||Phos Copper Binary Metal|
phosphorus copper rods,
copper based alloy
Anticorrosion Brazing Filler Metal Copper Brazing Rod 2.0 mm Round Rod
1 . The tensity is especially good, can be used as the substitute of the silver solder
2 . The coagulation scope is broad, fit for the big gap welding
3 . The lowest temperature of phosphor copper welding
1) If any quality problems such as manufacture, function or procedure occur within the guarantee period, We shall take responsibility and bear some theconomic losses.
2) If any quality problems such as occur within the guarantee period, we shall provide on line service after receive the buyer’s notice in 24 hours .3) can provide free samples for you check the quality . the samples need about 3-4days .
Technical Index :
|Alloy||Corresponding Alloy||Chemical Composition||Melting Temperature||Application|
Ministry standard : Material 201
Good fluidity, good operation, fit for the welding with the gap of above 0.3cm
Ministry standard : Material 202
Air conditioning, heat interchanger, vehicles, shipbuilding, scientific instrument, switch, contact and so on
Used in all kinds of heat interchanger, electric appliance parts, and all kinds of pipings
|BCu89PNi||4.8-5.8||7.0-8.0||0.4-1.2||REM||620||670||can be made welding ring, brazing medium gap joints.|
Ministry standard : Material 208
|5.0-6.0||5.0-6.0||REM||650||800||Suitable for brazing copper with copper alloy parts, and brazing large gap-joints.|
|BCu86SnP||DVS : CP302||6.4-7.2||6.5-7.5||REM||650||700||Coal gas apparatus, welding of freezer and other copper products|
Q1: Is it safe to drink the water or product once these are in place?
A1: The manufacturer Qixing Welding Material indicates that the 0 Silver Phos Copper Brazing Rod would be safe for use on copper water lines but is probably not the best way to to it. The cost of the O phos rod is considerably more than standard no lead solder.Also when brazing with the O phos the inside of the copper line will develop an black powdery coating which would have to be flushed out of the lines or the line would require a purge while brazing to prevent the black coating from forming.. As said before "not the best way to do water lines"
Q3: Do u produce the samples? How long it takes?
A3: Yes we do .Samples can be provided. The regular item in stock can be shipped within 3-5 days,your customized product maybe takes 15-25 days.
Q4: Is that possible to be your agent or distributor?
A4: Yes ,of course,we are glad to work with you to develop the market. Feel free to contct us for more information.
Contact Person: Ann